Quick Answer: Will 2 Different Brands Of RAM Work?

Is 2400 Mhz RAM good?

For example, 8GB DDR4-2400 RAM is running at a frequency of 2400MHz.

What’s important to remember here is that system RAM is not handling command processes like the CPU does, so while a higher CPU frequency will almost always mean better PC performance, the same may not be the case for high frequency RAM..

Can you add 8gb RAM to 4gb?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

Can I install RAM with higher frequency?

Yeah sure…. The RAM will run at 1333 MHz though(highest frequency supported by the motherboard). … But to use the RAM to it’s full potential, you can overclock your motherboard. Once you overclock the RAM in Bios, your motherboard will start using the full 1600Mhz capacity of the RAM thus unleashing a higher performance.

Is 3 sticks of RAM bad?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.

Is 128gb of RAM overkill?

Buy 128GB only if you want to run heavy Software and heavy games simultaneously. Except that 128GB is kind waste of Money. Further the cost of 128 GB stick is higher than core i5 processor. Go for Better GPU with more than decent amount of RAM.

Will 2 different pairs RAM work?

For two different size RAM sticks to perform optimally together, they need to use the same voltage and their respective controllers should play well with each other and the motherboard. That’s why it’s best to use the same model in all slots. However, this doesn’t mean you can’t use different size RAM sticks together.

Can I use 2 4gb and 2 8gb RAM together?

IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time.

Which RAM slots to use first?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

Can I use 2 RAM with different frequency?

You can’t add RAM of different sizes (frequencies/models/etc.) … If you install two RAM sticks of different frequencies, both of them will be working on the lowest frequency. So, if you Installed one stick with 1600Mhz and other with 2400Mhz, the latter will work on 1600Mhz, thus lowering its efficiency.

Does RAM have to be same brand?

You can usually use RAM sticks with differing specs without issue, but you will not have peak performance. You can have any size, any brand RAM together, as long as it’s the same DDR. … RAM sticks have to be in the same frequency to work normally. So, they are in the same size and frequency is enough.

Do all RAM slots need to be filled?

If it is DDR2 or DDR3 with 4 DIMM slots, then it will be a dual channel configuration, in which there will be no performance difference between having two slots filled vs all four filled, if only two are filled, it is the matter of if the motherboard supports the RAM sticks and the correct slots to fit them into.

Do all 4 sticks of RAM have to be the same?

Do all 4 sticks of RAM have to be the same? Yes, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency. … You can use 1 stick of RAM in a dual channel motherboard but it won’t be running in dual channel mode, only single channel.

Is 24gb RAM overkill?

24GB is just overkill. Also consider your current setup, hopefully you aren’t using a single 8GB stick. However if you are, toss it and put in the 2x8GB matched set for dual channel mode and increased performance.

Is 64 GB RAM overkill?

For gaming yes. Ok, nowadays, with modern/new games you will want 16gb of RAM. If you do more than just gaming (rendering/editing/graphical work), 32gb starts to become the minimum, 64gb the norm, and 128 for overkill (extreme usage). …

Is 32gb RAM overkill?

Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.

Is it bad to mix Ram brands?

Mixing Ram Speeds You will be performing to the speed of the slower RAM and your motherboard will automatically underclock the faster one. Even so, there shouldn’t be any problems. … Your computer is likely to run fine if you mix different RAM brands, different RAM speeds, and different RAM sizes.

Can I use mismatched RAM?

You are right about mixing different RAM modules—if there’s one thing you absolutely can’t mix, it’s DDR with DDR2, or DDR2 with DDR3, and so on (they won’t even fit in the same slots). RAM is pretty complicated, but there are a few things you can mix and a few things you shouldn’t. In any case, I don’t recommend it.