- How do I reset my DVR admin password?
- How do I reset my DVR to factory settings?
- What is DVR default password?
- How do I unlock my DVR account?
- How can I fix my DVR problem?
- How do I reset my QSEE password?
- How do I reset my H 264 DVR?
- Why is my H 264 DVR beeping?
- How do I connect my H 264 DVR to my android?
- What is the default password for DVR H 264?
How do I reset my DVR admin password?
To reset password of your CCTV DVR press and hold the ENTER button for 15 to 30 second until the DVR restart’s.
After the restart you DVR default wizard will come up the same way like if you are setting up the DVR for the first time..
How do I reset my DVR to factory settings?
To factory reset the device, unplug the DVR from power. Once power is removed from the unit, press and hold the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the DVR’s power supply back into the unit, you will hear a beep.
What is DVR default password?
The default passwords for your DVR or NVR are the same as the username. Therefore, the default password for the 888888 User is 888888, the default password for the admin User is admin and the default password for the 666666 User is 666666.
How do I unlock my DVR account?
Reboot the DVR by using the rear toggle switch or by unplugging. When the unit powers back on try and login with the default username and passwords. If neither of these passwords get you into your system you will need to email us at Support@CCTVSecurityPros.com and request a Master Password.
How can I fix my DVR problem?
Try the following steps to help solve many minor DVR issues:Make sure your equipment (TV and cable) is properly connected and powered on.Make sure the coax cable is connected to the outlet.Remove any objects around your receiver to allow proper ventilation.Refresh your receiver.More items…
How do I reset my QSEE password?
Step 1 Reset a Forgotten Password using QC View and Email. … Click the drop down option to change the user. … Click on “Forgot Password” … The QC View app is required to reset your password using an email address. … Press the Menu button in the top left corner. … Select “MORE” … Select “Reset Device Password”More items…
How do I reset my H 264 DVR?
Factory Reset InstructionsFirst, make sure that the unit is turned off.Then press and hold any button on the included infrared remote control.While holding the button on the remote, power on the unit.You should hear a single beep followed by a double beep. … Now that the DVR is booted, it will be set to the factory default settings.
Why is my H 264 DVR beeping?
If you find your DVR beeping or buzzing, it is because there is a setting in the DVR that activates the internal buzzer to sound when a hard drive error is detected. This is set by default on DVRs and NVRs we sell. The video below will guide you how to disable the internal buzzer on the DVR.
How do I connect my H 264 DVR to my android?
Step 1: CONNECT DVR TO MONITOR DIRECTLY. Just connect your CCTV DVR to monitor via VGA or HDMI CABLE. … Step 2: CONFIGURE CCTV DVR SETTINGS. For configuration. … Step 3: NOW CONFIGURE WIFI ROUTER FOR DVR. Open your PC. … Step 4: CONNECT DVR TO WIFI VIA LAN CABLE. … Step 5: CHECK THE SETTINGS. … Step 6: NOW CONNECT TO ANDROID PHONE.
What is the default password for DVR H 264?
1. Use the DVR factory default passwordDVRUserPasswordFVNadmin123456HDLadmin12345Hikvisionadmin12345Ivioadmin