Does Garage Drywall Need To Be Taped?

Should I use drywall or plywood in my garage?

Plywood walls give a natural wood grain pattern that offers a lot of texture and a warm ambiance to space.

On the other hand, drywall can provide a smooth, ready to paint white surface without any wood grain.

The added advantage of using drywall is that it’s like a blank canvas..

What is the best drywall to use in a garage?

Fire-resistant drywall is crafted with glass fibers in an extra-thick design. This makes them ideal for use in utility rooms, garages and areas near a furnace or wood stove. Tip: Small and medium construction projects are ideal for 4-foot by 8-foot standard drywall.

Is converting a garage a good idea?

One of the best things about converting your garage is that you get extra space to work with in a way that’s relatively fast, unobtrusive, and inexpensive. … But the good news is that converting a garage is still faster and much less expensive than buying a new home or building an addition on your home would be.

Should I install drywall vertically or horizontally?

Commercial: Hang the drywall vertically. … Hides uneven studs – Hanging horizontally also allows the drywall to flow over the framing so that bowed studs create less of a problem. If the drywall were hung vertically and a seam placed on a bowed out stud, the seam would be magnified because of the bump in the wall.

Can you use 1/2 inch drywall ceiling?

1/2-inch: Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. 5/8-inch: These panels are commonly used for ceilings, or for walls that require a prescribed fire-resistant rating.

How many coats of drywall mud do I need?

If your wall has distinct crevices, cracks, or textured areas, or if your brand of drywall mud isn’t offering enough coverage, you may have to do a couple of additional coats of compound. However, in general, you’ll need one coat to fill in the seams and three more coats after taping.

Does drywall need to be taped?

All drywall seams need to have tape embedded in joint compound. The tape strengthens the joint, and the joint compound, or mud, is the adhesive that holds the tape in place.

Which is cheaper drywall or plywood?

Drywall is cheaper than plywood – Most wood materials are expensive. … While it is not as expensive as regular wood, it is slightly more expensive than drywall. Fixing drywall is also a lot cheaper and less time consuming than plywood.

Is OSB cheaper than drywall?

The biggest reason is cost – 1/2″ drywall sheets are about the same price as 7/16 OSB (with 15/32″ OSB not far either).

Why did my drywall mud crack?

Drywall mud often cracks because it has dried too quickly or because the application was too thick. However, you don’t have to remove the mud and start over again. Instead, you can patch the cracked area once the mud has dried.

Is drywall required in garage?

OK so in a finished garage. The IRC code requires 1/2″ rock on the garage side of the garage walls and any supporting structure (steel posts, stud walls, etc). … If there is habitable space above the garage then 5/8″ is required on the ceiling and any horizontal members such as steel beams.

Can you use drywall in an unheated garage?

Short answer is yes, you can drywall an unheated garage. The problem won’t come from the heat but the humidity, which causes moisture, which causes rot and mold. Even though unheated, ventilation and a dehumidifier may be necessary depending on where you live.

What insulates better drywall or plywood?

Drywall offers superior fire resistance compared to plywood, making it the safer wall finish in most applications. … This typically means covering studs with a 5/8-inch sheet of fire-rated drywall in accordance with the manufacturer’s recommendations. Most plywood cannot be used to meet this requirement.

Is it OK to use plywood instead of drywall?

Plywood is a viable alternative to drywall for walls and ceilings. If you are planning on redoing your walls or ceilings, the typical materials you’ll use include Sheetrock or finished plywood. Each has its benefits as a building material and in some cases, finished plywood is the better alternative.

How thick should Plywood be for garage walls?

The International Residential Code specifies 3/8-inch plywood for sheathing walls with a standard stud spacing of 16 inches, if the siding is nailed to the studs through the sheathing. If the nails penetrate the sheathing, but not the studs, the minimum plywood thickness that the IRC designates is 1/2 inch.

What happens if you don’t tape drywall?

Drywall tape serves a single purpose: To help make the seams invisible. … Drywall tape does not offer an mechanical strength at all. If you skipped the drywall tape and just used joint compound to fill in the seams, the seams would become visible again after the compound dried. Joint compound shrinks!

Can I use plywood instead of drywall in my garage?

In areas that have adopted the IBC, you will need to have one layer of 5/8″ Type X drywall mudded and taped between the garage and any living space. You can hang plywood or peg board over that, no problem.

How thick is drywall in a garage?

Also, ⅝” is the standard thickness for fire-resistant or fire-code drywall, commonly found in garages. ¼” drywall is relatively uncommon, and can be used for repairs or for curved areas, where you can double up two sheets to make a standard ½” sheet. As far as lengths, the standard sheet size is 4′ x 8′.

What can I use instead of drywall in garage?

Before hanging drywall, consider alternative materials that add a practical or decorative touch in garages and workshops.Sturdy Wood Sheathing. … Stylish Metal Panels. … Low-Maintenance Plastic. … Practical Storage Panels. … Solid Cement Board. … Consider Fire Codes First.

What is the best material for a garage ceiling?

Plastic tiles are another good choice. They’re less expensive than metal tiles but come in finishes that resemble tin or copper, giving the garage a modern, elegant touch. They’re also fire retardant, which is an important safety feature in a room that’s often used to store flammable materials.

Is there a difference between sheetrock and drywall?

Drywall and sheetrock are really the same thing. Drywall is a panel made of gypsum plaster pressed between two thick sheets of paper. Sheetrock is a brand of drywall patented by the US Gypsum Company. Both are used to make walls and ceilings.